Loading... Please wait...
  • Image 1
  • Image 2
Customers also viewed


£90.00 (inc Vat) £75.00 (exc Vat)

Product Description


Product Reviews

Write Review

Showing reviews 1-10 of 11 | Next

  1. as good as you could expect

    Posted by Unknown on 27th Jan 2015

    top design, top quality, top flavour!!!

  2. flavor atty

    Posted by Unknown on 25th Jan 2015

    have it and used it 4 for days and very satisfied. If you like drippers this one is king.


    Posted by ADE NJ on 23rd Jan 2015

    The top air 22mm
    is soo gooood i got 1,then after i recived it,i started thinking hmmmm i think i need another,and ended up getting 2 more,you can never have too many hellfire's.but i did give 1 to my brother because he tryed mine and said yeah il have 1 of them..drilled his out to 3mm and still loads of vaper and loads of flavour with a 1 ohm coil wraped around a 1.5mm drill bit,using 0.30mm (28/29awg) wire...oh and its the best looking dripper ever aswell

  4. great dripper

    Posted by darren on 4th Jan 2015

    Easy to build looks smart enjoyable vape what can I say it's a hellfire

  5. Simply awesome

    Posted by edaj1511 on 26th Oct 2014

    This is a must have dripper. Very easy to set-up and the quality of the vape is magnificent!!!!
    Not to mention the superb machining thats comes as a standard for all hellfires :)

  6. He does it again!

    Posted by Sh1no8i on 21st Oct 2014

    Once again, no affiliation with the modder but he does it again. Simply genius. The atty measures 22mm in diameter and 16mm in height with a 1mm air hole hidden under the top cooling fin. The exterior design is aesthetically (in my personal opinion) absolutely stunning. The hidden air hole removes any unsightly holes on the exterior keeping it looking clean whichever side you look at it.
    The deck design is like nothing I've seen before, it may look complex and I'm guessing this wasn't an easy one to manufacture but in fact it's pretty easy to set up. You have a sectioned off juice reservoir and coil compartment with an opening into the tank between the two. Once the cap is on, the walled coil/deck compartment creates a reduced chamber.... plenty of ideas to play with here. I've used the standard cotton and micro coil, mesh and poly pad / sera wool. Pad cut to size and placed in the tank section to store juice but making contact with the mesh for capillary. Holds plenty of liquid therefore no need to drip often at all. If you're looking for something innovative, versatile and different from the rest that looks superb.. this is a must.

  7. 22 mm HF dripper

    Posted by Grinder on 21st Oct 2014

    Fantastic looking dripper on any 22mm mod.Top.quality workmanship as with all hellfire products.
    I found this dripper's very reduced chamber too small for my usual 2.4 mm micro coil's and built it with a 1.6mm
    coil to get good air movement around the coil and a full flavour vape.
    The large juice well is very innovative and greatly increases the times between filling.
    Could do with some indication as to where the air hole is positioned to make life easier to line up over the coil but gets better with practice.
    Would recommend to anyone with coil building experience.

  8. Flavour Monster

    Posted by Tim Hadfield on 20th Oct 2014

    This is a beautiful RDA - clean, sculptural lines and
    immaculate machining on this atomiser. It has a huge juice reservoir, and a separate raised wick compartment that appears small, but this is actually quite an easy atomiser to coil.
    Loads of vapour, and flavour is immense.

  9. Fantastic!

    Posted by Fear on 19th Oct 2014

    It says a lot for me to buy two atties from a manufacturer, much less 2 in the same month. The Top Air was fantastic and this is as good for flavor but holds a fair bit more juice. I am going to do my best to not drill this one out to 1.2mm. Air flow seems to be a bit looser than the top air was (1.2mm is still plenty small for great flavor production)
    All in all very happy with my purchase. I think all owners of at least 2 Attysmith Atties should get advanced notification of stock. (Hint)

  10. only surpassed by the shorty.

    Posted by tommy on 19th Oct 2014

    Great throat hit and flavor and plenty of vapour. Has a huge capacity and is very easy to throw a mesh slug in

Showing reviews 1-10 of 11 | Next

Current Stock:
Out of stock


Latest News